Featured Brands

Low Tech Talk

 Untitled Document
Low Tech Talk About High Tech Stuff

The View As of November 1st, 2017
By Red Barnes, Chairman of the Board
Send Red an e-mail at Red@barneswelding.com

Millermatic 124 Hobby

This cycle we are featuring MILLER ELECTRIC Millermatic 125 Hobby (MLR907692) . There are many small MIG hobby units on the market. Some are good and some not so good. They will all strike an arc and weld but if you want something that will last and be able to get parts for years from now, I strongly suggest that you buy a name brand. This unit is well built, when you open it up you will see a heavy cast aluminum drive system. This unit will weld 24 gauge -1/8 inch steel with hard wire and 18 gauge – 3/16 steel using a flux core wire. The auto-set feature provides the right settings. Just turn the wire speed to auto-set position, a blue light will light up showing it is activated. Dial the metal thickness and start welding with the exact parameters you need. This unit comes with a built in gas solenoid, for MIG welding. For welding with flux core wire you will not need any gas. The unit is protected by a thermal overload. An overload light will indicate an overload and will reset when the unit cools off. This unit operates on 115 VAC 20 Amps single phase. The package comes with the Power source, power cord and plug, 8 ft. M80 MIG gun and cable, 8 ft. work cable and clamp, argon and AR/Co2 mix flow gauge regulator with hose, a spool of HOBART .030 solid wire, two contact tips for .030 solid wire, quick set drive roll for .024 /.030/.035 solid and flux core wire. A metal thickness gauge is included.

Job Site Speaker

It seems that everyone owns a smart phone and carries their music with them. Makita's  18V LXT Lithium Ion Blue Tooth Job Site Cordless Speaker (MAKXRM07) is just what is needed on the jobsite and while relaxing. This compact 7.5 pound, 10 Watt cordless speaker has weather resistant controls on top, will run for 31 hours on Blue tooth from a standard 18V Lithium Ion battery. The unit has a USB port for charging a mobile device, an auxiliary input port. An AC adapter is included. There is also a built in compartment for storing your device.

We now stock the VOLTEC Pro LED Work Light (EXT08-00624). This unit uses the high power COB LED. It is a 300 lumen spot light. When you extend the body it exposes the COB LED to produce a 250 lumen flood light to light up the entire area. It has a high and low setting, magnetic base and is constructed of heavy aluminum alloy. It uses 4 AAA Batteries (Not Included)

3 Watt Work Light       25 Ft Tape Measure

We have another 25 ft. Tape measure in stock. It is the KOMELON 7325 (KOM7325). It has high visibility with a pause button and a magnetic tip on the end hook.

   If you have any input on what you would like to see us do please email me at Red@Barneswelding.com.

   We want to be what you want us to be.

  We appreciate your business!